PCD is widely used for machining non-ferrous metals and alloys, such as aluminum, copper, aluminum/gray iron composites, as well as nonmetallic materials such as wood, chipboard, ceramics, plastic, rubber etc., where high abrasion resistance and good surface finish are required.
SinoDiam International offered a wide range of PCD for different application, and can cut the segments
size as the customer request
| Code # |
Diameter(mm) |
Diamond layer (mm) |
Height(mm) |
Diamond size(μm) |
Feature |
Application |
| SDPD032-A |
48.0 |
0.5±0.15 |
1.0/1.2/1.6/2.0/2.5/3.2 |
30+2 |
Extremely high abrasive resistance. Impact toughness is strengthened by the order of 025-A,025-B,032-A and 032-B, EDM cutting performance is strengthened by the order of 025-A,032-A,032-B and 025-B |
Used in highly abrasive materials, such as ceramic, hard metal, silicon carbide, stone and laminate flooring. |
| SDPD032-B |
48.0 |
0.5±0.15 |
30+2 |
Specially used in chipboard and other places where require rough feed. |
| SDPD025-A |
48.0 |
0.5±0.15 |
25 |
Used in laminate flooring, density board, carbon fiber materials, silicon carbide, high-silica aluminum alloy. |
| SDPD025-B |
48.0 |
0.5±0.15 |
25 |
Used in the manufacturing of common wood saw blade and products requiring EDM. cutting. |
| SDPD012-A |
48.0 |
0.5±0.15 |
10+2 |
Combining high abrasive resistance, impact toughness and high degree of surface finish. Abrasive resistance is strengthened by the order of 010-C,010-B,012-A and 010-A. Impact toughness is 010-A,012-A,010-B and 010-C, EDM cutting performance is 010-A,012-A,010-C and 010-B. |
Used in fine processing of circuit boards, silicon-aluminum alloy and copper alloy |
| SDPD010-A |
48.0 |
0.5±0.15 |
10 |
Used in processing of wood, circuit boards, low silicon-aluminum alloy and fine ceramics. |
| SDPD010-B |
48.0 |
0.5±0.15 |
10 |
Used in manufacturing all kinds of segments with EDM cutting. |
| SDPD010-C |
48.0 |
0.5±0.15 |
10 |
Used in the places with fine processing where require rough feed and low abrasive resistance. |
| SDPD005-A |
48.0 |
0.5±0.15 |
5 |
High impact toughness, suitable for EDM cutting, extremely high degree of surface finish. |
Used in the places where require high degree surface finish, such as low silicon-aluminum alloy, non-ferrous metal, semiconductor and plastic. |